Setting up your HP Deskjet F380
So you just bought your HP Deskjet F380, took it out of the box and are ready to set it up. Setting up your F380 is easy and can be done by following these steps. Make sure you take your time and do the steps as thoroughly as you can. You want your F380 to work correctly don’t you?
#1- You’re going to want to connect the printer to your computer. This is one of the easier steps to do. Just take the cable that comes in the box with the HP Deskjet F380 and connect it to the printer. Make sure that the cable is plugged into the printer and plugged into your computer securely. You need to make sure that this cable is not loose and it is plugged in as far as it can go. This will give you a secure connection and will make sure your printer will function at 100%.
#2- The next step in setting up your HP Deskjet F380, is to get out the install CD and install the software on your computer. This is a fairly straightforward step. Find the CD that came with your F380, then put it into your disk drive. All you really have to do at this point is, follow the on-screen instructions and make sure that your copier software goes into your computer the right way. Is there any errors during installation you may need to reinstall the software. This may take a little time, but you need your software to be installed correctly in order for your F380 to work.
#3- the final step in setting up your HP Deskjet F380, is to find the surface that it will be sitting on. This can prove to sometimes be harder than it seems. You need to make sure you have your printer on a level surface. If it is not on a level surface your F380 he could fall off your desk or wherever it was sitting. This can obviously damage your printer so you want to make sure to avoid it at all cost.
In closing, setting up your HP Deskjet F380 is a fairly simple process. It may take a little time, but you need to take this time to make sure to set up correctly. Connecting your printer to the computer is fairly easy. You also just need to make sure that your printers software is installed correctly. In addition, make sure that you place your F380 on a flat surface. This can save you lots of trouble in the future. So take your time and make sure your F380 is set up correctly and it will serve you well throughout the years.